Aufrufe
vor 1 Jahr

User Manual Triebel Reloading Dies

  • Text
  • Cartridge
  • Spindle
  • Sizer
  • Interior
  • Seater
  • Sizing
  • Holder
  • Sleeve
  • Ejector
  • Expander
  • Manual
  • Triebel
  • Reloading
  • Guntools.de
Unser manual and safety instructions for original Triebel Reloading dies.

Replacing components

Replacing components Replacing components Removing the spindle The removal and installation of the components is similar for all types of dies. The description here is just an example. To install the components, reverse the procedure for removal. 1 Bullet seater die spindle 2 Bench-rest neck sizer die spindle for short cartridge cases 3 Bench-rest neck sizer die spindle 4 Full-length die spindle 1. Unscrew the spindle from the die. 2. Unscrew the counter nut from the spindle. 3. Unscrew the counter nut with spindle from the spindle. 4. Depending on type, unscrew the knurled sleeve, interior expander or seater punch. 5. Set the individual parts aside. www.triebel-guntools.de 30/37 User Manual-2.0

Replacing components Fitting the spindle with interior expander for normal cartridge cases 1 Knurled sleeve 2 Ejector pin 3 Interior expander 4 Spindle 1. Screw the interior expander onto the spindle. 2. Insert the ejector pin into the knurled sleeve. 3. Screw the knurled sleeve with the ejector pin onto the spindle. 4. Screw the counter nut with spindle onto the spindle. 5. Screw the counter nut onto the spindle. Fitting the spindle with interior expander for short cartridge cases 1 Interior expander 3 Spindle 2 Ejector pin 1. Insert the ejector pin into the interior expander. 2. Screw the interior expander with the ejector pin onto the spindle. 3. Screw the counter nut with spindle onto the spindle. 4. Screw the counter nut onto the spindle. www.triebel-guntools.de 31/37 User Manual-2.0

© Copyright 2017.Triebel Waffenwerkzeuge GmbH. Alle Rechte